>> Hướng dẫn đặt hàng trực tuyến

Giá có thể thay đổi chưa kịp cập nhật, xin vui lòng liên hệ trực tiếp để biết giá

Tên thiết bị:  Loa kiểm âm Kali Audio LP-6 6.5" Studio Monitor (Each)

Model:   Kali Audio LP-6 6.5"

Thương hiệu:  Kali Audio

Tình trạng: đóng hộp, hàng mới, chính hãng 100%

Hình ảnh thiết bị như hình chụp

Liên hệ Hotline: 0946.112.556

Zalo tư vấn: 0946112556


OVERVIEW

Transparent Sound

The Lone Pine Series is designed to allow you to hear every detail that's happening in your mix.

This starts with an exceptionally accurate frequency response. Whatever is present on your mix is what you'll hear in these monitors. Nothing is boosted or suppressed to cover flaws or try to sound more pleasing.

With the LP-6 and LP-8, you can mix with more confidence, and you can also be assured that your mix will translate as best as possible to whatever systems your audience is using.

3-D Imaging Waveguide

The waveguide on Project Lone Pine monitors allows you to hear spatial details and a soundstage that is wider, taller, and deeper than the space between the speakers themselves.

Every time you hear a loudspeaker, you're hearing both the direct sound from the speaker, and reflections from the speaker's signal bouncing off of objects in the room.

When those reflections are congruent with the direct sound from the speaker, listeners perceive a better sound overall, and are able to make out very subtle details like where microphones are placed in a room.

When done very well, the stereo image will be three-dimensional, representing a sound stage that is wider, deeper, and taller than the speakers themselves.

This gives you a very high degree of confidence in your mix. It allows you to mix faster, and produce better mixes overall.

High dynamic range, low distortion

The dual layer, large diameter voice coil on the LP-Series helps keep the sound clear and free of distortion.

Low noise port tube

The LP-6 and LP-8 both have the clean, punchy bass of a front-ported speaker with very low noise from the port tube.

On most port tubes, air leaves at different speeds from different points of the opening, creating noisy turbulence. This turbulence can be heard as "chuffing," or an audible air sound coming from the monitor. This sound will add to the noise floor and obscure the details of the low end.

The port tube on LP-6 was designed to ensure that all of the air leaves the port tube at the same velocity. This helps add to the low end response of the speaker, while keeping the bass clean, tight, and devoid of extra noise.

A standard port tube: air leaving the port tube at different velocities creates noisy turbulence.

The port tube on Project Lone Pine studio monitors: all the air leaves the port at the same velocity for clean, powerful bass.

High Output

At continuous reference-level output, the LP-Series monitors have at least 20 dB headroom at the listening position. The LP-6 has enough output for most 1-2 person setups, and LP-8 can handle larger setups easily.

Ample headroom ensures that even loud mixes with high dynamic range will come through clearly.

Bass Power

Bass on the LP-Series monitors is delivered by larger magnets and larger voice coils than any comparable speakers on the market. This gives you more accurate bass response that extends lower, so you can dial in exactly the low end sound you need.

Easy to Use

Boundary EQ Control

A speaker's given position in a space can drastically change it's frequency response. A speaker placed against a wall or on a desk will sound very different than a speaker placed on a stand, even in a well-treated space. Hard surfaces like walls, desk tops, and recording consoles can change the low end frequency response of the monitor, and degrade the overall clarity of the sound.

Happily, most of the common positions are fairly predictable and easily corrected.

Kali's team did our Boundary EQ tuning at The Village Studios in Los Angeles, and came up with boundary compensation EQ settings to help you get the optimum sound for where you need to put your speakers. Combined with the LF and HF trims, this will ensure that the speakers sound their best no matter what room you're mixing in, or where the speakers are placed.

Boundary EQ Settings

Easy Connections

The LP-6 and LP-8 both feature balanced XLR and TRS inputs, and an unbalanced RCA input.

The RCA input can be set to -10 dBu sensitivity when you're using consumer devices like a laptop or smartphone's headphone jack.

Class D Power

The integrated Class D Power amp delivers clean, reliable power that's optimized to this speaker.

Both models use 40W for the 1” soft dome tweeter. The LP-6 uses 40W for the 6.5-Inch woofer, and the LP-8 uses 60W for the 8-Inch woofer.

SPECS

  LP-6 LP-8
Powered: Yes Yes
 Amplifier Class: D D
 Power Configuration: Bi-Amped Bi-Amped
 LF Power: 40 W 60 W
 HF Power: 40 W 40 W
 Total Power: 80 W 100 W
 LF Driver: 6.5" Woofer 8" Woofer
 HF Driver: 1" Soft Dome Tweeter 1" Soft Dome Tweeter
 Freq. Response: (-10 dB) 39 Hz - 25 kHz 37 Hz - 25 kHz
 Frequency Range: (±3 dB) 47 Hz - 21 kHz 45 Hz - 21 kHz
 Crossover: 1.5 kHz 1.8 kHz
 Listening Distance:
(85 dB Continuous,
20 dB headroom)
2.2 Meters 2.8 Meters
 Max SPL: 112 dB 114 dB
 System THD
(94 dB @ 1 M):
<3% 80 Hz - 1.7 kHz
<2% above 1.7 kHz
<2.5% 80 Hz - 400 Hz
<1.5% above 400 Hz
 Unbalanced Inputs: 1 x RCA
 Balanced Inputs:    1 x TRS
1 x XLR
 TRS/XLR Input Sensitivity:        +4 dB
 RCA Input Sensitivity: -10 dB
 HF Trim: -2 dB, ±0 dB, +2 dB
 LF Trim: -2 dB, ±0 dB, +2 dB
 Boundary EQ Settings: Free space (On stands, away from walls)
On stands, within .5 meters of a wall
On stands, against a wall
Meter bridge
Wall Mount
On a desk, away from walls
On a desk, within .5 meters of a wall
On a desk, against a wall
 Enclosure: Front Ported
 Height: 14.125 Inches (35.9 cm) 16.5 Inches (41.9 cm)
 Width: 8.75 Inches (22.2 cm) 10 Inches (25.4 cm)
 Depth: 10.25 Inches (26 cm) 11.25 Inches (28.6 cm)
 Product Weight: 15.54 lbs (7.01 kg) 19.8 lbs (9 kg)
 Shipping Weight: 18 lbs (8.16 kg) 22.5 lbs (10.2 kg)

 

 

 

Chúng tôi vận chuyển tận nơi trên toàn quốc, nhận hàng thanh toán tiền cho người giao hàng. Hà Nội nhận hàng trong ngày. Các tỉnh khác nhận hàng 1 -2 ngày

Liên hệ: 0946.112.556 - 0220.2.223.225



© Bản quyền thuộc về công ty TNHH VNM
www.dienmayviet.com.vn    www.dienmayviet.vn

Nhà phân phối trên toàn lãnh thổ Việt Nam. Miễn phí vận chuyển tận nơi trên toàn quốc, nhận hàng thanh toán tiền
Thiết bị được phân phối bởi:  Công ty TNHH MTV Phát Triển Công Nghệ Máy Tính VNM
Hotline: 0946.112.556 - 0320.2.223.225 - 0320.3.841.496
E-mail: Product.vnm@gmail.com
Yahoo online: vnm_colorvis_sale
Hàng chính hãng, Full box, new 100%

 

Công ty TNHH VNM. Nhà phân phối sản phẩm chính hãng
Pin laptop chính hãng, sạc laptop chính hãng, pin máy ảnh chính hãng, sạc máy ảnh chính hãng, pin máy quay chính hãng, sạc máy quay chính hãng. Vui lòng truy cập www.chinhhangpin.com hoặc www.pinoriginal.com

 


Website trực thuộc quản lý của công ty TNHH VNM:

www.dienmayviet.vn
www.dienmayviet.com.vn
www.chinhhangpin.com
www.pinoriginal.com

Bình chọn sản phẩm: (5.0 / 1 Bình chọn)